Your shopping cart is empty!
The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).
Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and costa effective to deploy.
SPECIFICATIONS | |
Dimensions | 364 x 364 x 276 mm (14.33 x 14.33 x 10.87") |
Enclosure Characteristics | Outdoor UV Stabilized Plastic |
ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
Gain | 22 dBi |
LEDs | Power, (1) LAN, (4) WLAN |
Max Power consumption | 6w |
Memory Information | 64 MB DDR2, 8 MB Flash |
Mounting | Pole-Mount Kit Included |
Networking Interface | 10/100 Ethernet Port |
Operating Frequency | 5170 - 5875 MHz 5725 - 5850 MHz |
Operating Humidity | 5 to 95% Non-Condensing |
Operating Temperature | -40 to 70° C (-40 to 158° F) |
Polarization | Dual Linear |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Power Supply | 24V, 0.5A PoE |
Processor Specs | Atheros MIPS 74Kc, 560 MHz |
RoHS Compliance | Yes |
Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
Supported Voltage Range | 20-26VDC |
Temperature Shock Test | IEC 68-2-14 |
UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
Vibration Test | IEC 68-2-6 |
Weight | 2.55 kg (5.62 lb) |
Wind Loading | 210 N @ 200 km/h (47 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
Wireless Approvals | FCC, IC, CE |